Outcome of Board Meeting

MTTL/SECT/45/2026-27 Date: November 4, 2026 To, To, The Secretary, The Manager, Listing Department, Listing Department, National Stock Exchange of India Limited, BSE Limited, Exchange Plaza, 5th Floor, Plot No. C/1, Phiroze Jeejeebhoy Towers, G Block, Bandra Kurla Complex, Dalal Street, Fort, Mumbai-400001. Bandra (E), Mumbai-400051. Scrip Code: 526263 Symbol: MOLDTECH Sir/Madam, Sub: Outcome of the Board Meeting pursuant to Regulation 30 of SEBI (Listing Obligations and Disclosure Requirements) Regulations, 2015. With reference to the captioned subject, we wish to inform you that the Board of Directors (“Board”) of the Company at its meeting held today i.e. on November 4, 2026, inter-alia, considered and approved the following matters: 1. Un-audited Financial Results (Standalone and Consolidated) of the Company for the second quarter and half year ended on September 30, 2026. 2. Limited Review Report issued by M/s. Praturi & Sriram, Statutory Auditors, on the financial results of the Company for the second quarter and half year ended on September 30, 2026. 3. Appointment of Ms. Chetana Attal (Membership No. A77095) as Company Secretary and Compliance Officer (Key Managerial Personnel) of the Company with effect from the commencement of business hours on November 4, 2026. Pursuant to Regulation 30 and 33 of the SEBI (Listing Obligations and Disclosure Requirements) Regulations, 2015, we are enclosing herewith the un-audited Financial Results (Standalone and Consolidated) of the Company along with the Limited Review Report issued by Statutory Auditors for the second quarter ended on September 30, 2026. The requisite disclosure pertaining to Change in Key Managerial Personnel as required under regulation 30 read with Para A of Schedule III of the SEBI Listing Regulations and SEBI Circular No. SEBI/ HO/49/14/14(7)2025-CFD-POD2/I/3762/2026 dated January 30, 2026, is enclosed and marked as Annexure - I. The meeting of Board of directors was commenced at 11: 41 A.M. (IST) and concluded at 02: 19 P.M. (IST). This is for your kind information and records. The detailed press release pertaining to the financial results is also enclosed herewith for your record. Thanking you, For Mold-Tek Technologies Limited J. Lakshmana Rao Chairman & Managing Director DIN: 00649702 Encl.: As above Mold-Tek Technologies Limited Regd. Off.: Plot No.700, Door No.8-2-293/82/A/700, Road No.36, Jubilee Hills, Hyderabad – 500033, Telangana, India Phone: +91-40-40300300/01/02/03/04, Fax: +91-40-40300328, E-mail Id: cstech@moldtekindia.com Website: www.moldtekindia.com CIN No: L25200TG1985PLC005631 Annexure I Details required under the SEBI (Listing Obligations and Disclosure Requirements) Regulations, 2015 read with SEBI Circular No. SEBI/ HO/49/14/14(7)2025-CFD-POD2/I/3762/2026 dated January 30, 2026 Sr. Details of events that need to be Information of such event(s) No. provided Name of the Company Secretary and Ms. Chetana Attal Compliance Officer Reason for change viz. appointment, Appointment 2. reappointment, resignation, removal, death or otherwise Date of appointment/ re- Date of appointment: November 4, 2026 3. appointment/cessation (as applicable) Term : Not Applicable & term of appointment/re-appointment Ms. Chetana Attal is a qualified Company Secretary and an Associate Member of the Institute of Company Secretaries of India (ICSI). 4. Brief Profile Ms. Chetana Attal is also a LL.B graduate and has expertise and experience in Legal, Corporate and Secretarial functions, specializing in areas such as Company Law, SEBI regulations, and related acts, rules, and regulations. Disclosure of Relationship between Not Applicable Directors Mold-Tek Technologies Limited Regd. Off.: Plot No.700, Door No.8-2-293/82/A/700, Road No.36, Jubilee Hills, Hyderabad – 500033, Telangana, India Phone: +91-40-40300300/01/02/03/04, Fax: +91-40-40300328, E-mail Id: cstech@moldtekindia.com Website: www.moldtekindia.com CIN No: L25200TG1985PLC005631 Q2 FY 26-27 Press Release Key Financial Highlights: (H1 vs H1)  PAT grown up by 4.8 times to ₹ 18.62 Cr in H1 FY 26-27 from ₹ 3.92 Cr in H1 FY 25-26  Revenue up by 63.70% (1.6 times) to ₹ 120.35 Cr in H1 FY 26-27 from ₹ 73.52 Cr in H1 FY 25-26  ROCE stood at 34.08% in H1 FY 26-27 MOLD-TEK TECHNOLOGIES LIMITED ANNOUNCES UNAUDITED Q2 FY27 RESULTS; DELIVERS HIGHEST-EVER QUARTERLY PROFITS DRIVEN BY STRONG EXECUTION, BUSINESS DIVERSIFICATION AND U.S. EXPANSION. Hyderabad, 04th November 2026 - Mold-Tek Technologies Limited ("MTTL"), a leading Engineering Services company providing Civil & Structural Engineering; Mechanical Engineering and Power & Transmission solutions to global clients, today announced its financial results for the quarter ended 30th September 2026. REVENUE EBITDA PAT Consolidated Figures: (in Lakhs) Particulars H1 H1 H1 vs H1 Q2 Q2 Q2 vs Q2 FY 26-27 FY 25-26 (Times) FY 26-27 FY 25-26 (Times) Revenue 12,035.49 7,352.22 1.65 6,081.27 4023.10 1.51 EBITDA 2,848.86 840.19 3.39 1,458.14 596.34 2.45 EBITDA % 24% 11% 24% 15% PAT 1,862.31 391.99 4.75 961.89 323.52 2.97 PAT % 15% 5% 16% 8% EPS (in ₹) Pre-Bonus 6.47 1.36 3.34 1.12 EPS (in ₹) Post Bonus 3.23 0.68 1.67 0.56 Q2 FY 26-27 Press Release Standalone Performance Highlights of H1 vs H1  Revenue ₹ 9,216.48 Lakhs (FY 25-26 H1: ₹ 6,636.43 Lakhs) up by 38.88%  PAT ₹ 2,019.31 Lakhs (FY 25-26 H1: ₹ 374.09 Lakhs) up by 439.79%  EBITDA ₹ 3,002.27 Lakhs (FY 25-26 H1: ₹ 821.86 Lakhs) up by 265.30% Standalone Performance Highlights of Q2 vs Q2  Revenue ₹ 4,664.55 Lakhs (FY 25-26 Q2: ₹ 3,724.80 Lakhs) up by 25.23%  PAT ₹ 1,016.59 Lakhs (FY 25-26 Q2: ₹ 315.20 Lakhs) up by 222.52%  EBITDA ₹ 1,510.92 Lakhs (FY 25-26 Q2: ₹ 587.81 Lakhs) up by 157.04% Consolidated Performance Highlights of Q2 vs Q1  Revenue ₹ 6,081.27 Lakhs (FY 26-27 Q1: ₹ 5,954.22 Lakhs) up by 2.13%  PAT ₹ 961.89 Lakhs (FY 26-27 Q1: ₹ 900.42 Lakhs) up by 6.83%  EBITDA ₹ 1,458.14 Lakhs (FY 26-27 Q1: ₹ 1,390.72 Lakhs) up by 4.85% Commenting on the results Mr. J Lakshmana Rao Chairman & Managing Director, The Company has delivered a strong first-half performance, with consolidated revenue growing 63.70% and PAT increasing approximately 4.8 times year-on-year. The performance reflects continued execution of our strategy focused on business diversification, operational excellence and expansion into higher-value engineering services. Strong project execution, improved resource utilisation and healthy business momentum have supported growth across our businesses. Commenting on the results, CMD Mr.J.L. Rao, stated that the Company’s operational profit, excluding foreign exchange gains and losses, increased to ₹11.42 crore from ₹10.39 crore, marking its highest-ever quarterly performance in Q2. He also added that company is entering into new domains of Civil Engineering and added a significant client in this domain which may led to better growth in coming years.” Q2 FY 26-27 Press Release Over the past few quarters, we have continued to implement productivity-enhancement initiatives, including greater adoption of automation tools, standardised engineering workflows, performance- linked incentive programmes and structured operational reviews. These initiatives are aimed at improving per-engineer productivity, revenue per employee and operating margins. Beryl has expanded our capabilities into regulatory engineering services, including residential engineering, permit engineering, plan review and building inspection services. This has strengthened our U.S. presence and positioned Mold-Tek to offer integrated engineering solutions across the construction lifecycle. We have also initiated expansion into additional U.S. states, broadening our addressable market. Our order pipeline remains encouraging across Civil & Structural Engineering and Mechanical Engineering. With the growing contribution from Beryl, expanding higher-value services and a strong balance sheet, we remain focused on sustaining profitable growth and creating long-term value [Showing first 8,000 characters — download PDF for full document]